How To DIY Your Steering Wheel Wrap In 4 Easy Steps

Similar to other parts of your car, the steering wheel is also an essential part of the smooth functioning. It is one of the crucial elements, which takes your car in the right direction. Therefore, it becomes vital to give it proper care and maintenance similar to the car engine. Just as a new engine provides the car with increased power, a steering wheel wrap provides the steering wheel with a good look and safety from elements.

However, many choose to get the steering wheel a cover from the market. However, some are looking to create a custom steering wheel wrap.

How Can I Make My Own Steering Wheel Wrap?

Making a steering wheel wrapping is not a hard task. It offers your car steering wheel a new look. Experts recommend making a leather steering wheel wrap as leather can sustain for a longer time. However, there are some essentials including a pair of scissors, colored leather of your choice, chalk, a sewing machine, sewing needle, and a strong thread.

Once you have gathered all the essentials, follow the procedure mentioned below.

1. Cut The Leather

Firstly, measure the circumference of your car’s steering wheel by multiplying it with the value of Pi that is 3.14. Now, place your hands on the steering wheel in an 11 and 1 o’clock position. You can measure the circumference where the fingers wrap around. Cutting some extra leather in length and breadth wise would be a good idea to prevent it from falling short. It is the first step in making your car steering wheel wrap without any hassle.

      SEE MORE:

• Top Three Ways to Hold the Steering Wheel While Driving
• Cause and Solution for Steering Wheel Getting Locked Up While Driving

2. Sew The Leather Cover

Once cutting the leather completes, put the sides you want visible together and sew them together to make one long piece. Now, take the stitched pieces of leather to the steering wheel and wrap it around. Make sure that the cover does not slip off while you are driving in traffic. To do this, pin the leather so that it is not too tight and fits comfortably.

Lastly, sew a straight line across the pinned area. Make sure that the non-sewed ends are also even. It is a useful steering wheel maintenance tips to remember.

3. Trimming The Strips

You should now have the two pieces sewn together at the short ends of the side of the leather, which you want visible to the face. By now, you would have a leather strip similar to a scarf, which would need some trimming. We recommend that you get an exact measurement of the width of the steering wheel by wrapping a string around it and marking where the circle completes. Ensure that you measure the distance of the string, and mark and trim the leather piece.

4. Sew The Cover Onto The Wheel

This step requires the most patience as it takes time to accomplish. You need to take the leather to the sewing machine and dry sew 1/8 inch from the edge on both sides.

Summing Up

Thus, when you want to give your car steering wheel a new style and look, then these DIY steering wheel wrap tips would help you design the best steering wheel cover.