How to Easily Fix Minor Dents on Your Car

Dents happen to everyone! It is inevitable that your car will get a dent at some point. Some dents are more difficult than others and cause extensive damage to the rest of your vehicle, but all can be fixed with relative ease. The key is knowing how to handle them and what tools you’ll need for the job. Read on for our top tips on fixing minor dents without breaking your bank account!

Go To A Professional Service

If you’re not feeling handy or if the dent isn’t that small, it’s best to leave the repair to a professional. It may cost you a little bit more, but for bigger dents, a pro can make a huge difference in how your car looks and runs. As seen at PDR CANADA, these services will repair these damages paint-free, leaving the original finish intact and restoring your vehicle’s value instantly. When looking for good service, be sure to do your research and ask around for referrals. Don’t forget to read client reviews as well as they can be very helpful in finding a reputable business. You should also make sure to find out about the costs involved and how long it will take for them to complete the job.

Use A Plunger

If the dent is small and you don’t mind getting your hands dirty, you can try using a plunger to push it out from the inside. This method often works best on dents that are near the edge of the car. All you need is a regular plunger and a bucket or large bowl of water.

The first step is to fill up the bucket or bowl with water and place the plunger in it so that the suction cup is submerged. Next, position the dent over the plunger and push down on it firmly. You should hear a popping noise as the suction cup pulls the dent out. If it doesn’t work the first time, don’t give up – try again!

Use Boiling Water

This is another method that often works on dents near the edge of the car. Hot water will cause the metal to expand, which can help to push the dent out. 

The first step is to boil a pot of water and let it cool for a few minutes so that it’s hot but not scalding. Next, pour the hot water over the dent and wait a few seconds. Finally, use a plunger or towel to push the dent out. Again, if it doesn’t work the first time, don’t give up – try again!

Use A Hairdryer

Did you know that a hairdryer can be used as a heat gun? You can use it like one to pop out tiny dents without much effort. 

Start by positioning your hair dryer above the dent and turning it on high heat. Then, quickly place a plastic bag over the hole and hold the dryer close to it for 5-10 seconds. The heat will cause the plastic bag to expand, which can help pop out the dent. When you’re done, be sure to clean up the plastic bag remnants so that they don’t cause any further damage.

Use A Vacuum Cleaner And Bag

This is a method that often works on bigger dents. Start by using a vacuum cleaner with a long hose. Position it head-down on top of the dent and turn the suction pressure to maximum power. Next, place a plastic bag over the vacuum nozzle and secure it in place with rubber bands or string. When you’re ready, blast the suction for around 8 seconds and then quickly pull the vacuum away. The dent should pop out as the bag pulls up.

Do-It-Yourself Dent Removal Products

There are some tools that you can buy to help you remove dents yourself. These products often work best on smaller dents, but there are some that can be used on bigger ones as well. When choosing a product, be sure to read the reviews first. This will help you to find a quality product that is likely to work well. You should also make sure to follow the instructions carefully so that you don’t damage your car further.

One popular product is the dent puller tool. To use it, simply position the dent puller at an angle over the outside of the dent. The suction cup should fit perfectly into the gap between the metal and then release it by pulling outwards. 

How To Fix Paint?

When you fix the dent, you might notice some paint has come off as well. Luckily, there are a few things you can do to fix the problem. 

The first thing to try is rubbing compound paste. This works by hiding any scratches in your metal and smoothing them out. Simply rub it in and wipe it off using a damp cloth – make sure not to rub too hard, tho.

Polish is another option that you can use to cover up dents. Apply it with a brush, and once the polish dries, buff it lightly to make the surface shiny again. If there are no dents in the paint, you can use car wax to protect the surface. Wax will help to keep your paint looking new and shiny for longer.

Dents are a common occurrence on cars, but they can be expensive to fix if you don’t know what you’re doing. If you have a dent in your car and want it removed without damaging the paint or other parts of the vehicle, try one of these methods first! You can use a plunger, hairdryer, vacuum cleaner, or other products on the market to pop out small dents. No matter what method you choose to use on your car, be sure to carefully read any provided instructions before trying again. If these methods don’t work for you, you can always turn to professionals. They will have the tools and expertise to get any job done. These guys are able to fix the dents on your car without removing the paint. And finally, always remember to wax and polish your car after the dent has been removed! This will help to keep it looking new and shiny for longer.