CAR FROM JAPAN - Find best deals of used cars from reliable Japanese sellersSearch Car

Car Idles Fine But Dies When Given Gas: What Are The Reasons?

ByMatsumoto Naoki-April 14, 2023

Our today’s problem is the car idles fine but dies when given gas. Let’s get onto this issue to see what you can do to deal with it properly!

A lot of car problems can be hard to solve and handle, especially when we don’t know what happens with the whole system. Some can also cost you a significant amount of money to the point that replacing a new one seems to be a more optimal idea than repairing them.

So to make suitable decisions and avoid being burdened with car repair bills, it’s always crucial to understand what’s going on or going wrong under the hood. Nobody asks you to be super competent in this field. However, being able to recognize and identify several primary and not-severely-problematic issues is always the best. The best treatment for your car, the best deal for your wallet!

Car Idles Fine But Dies When Given Gas: Common Reasons

Below are some of the most common reasons for the car idles fine but dies when given gas. Some may be familiar as you may already see them as roots for other problems. But the car is a whole connected system, if you have parts related, reasons can also be.

Here are the summary reasons you want to take a glance at. Choose any reasons you find confusing and get to know them better on our table because several things may be already familiar to you.

The following are the most typical causes of an automobile dying unexpectedly when you push the gas pedal:

  • Clogged fuel filter or air filter
  • Air control valve problem
  • Failed airflow sensor
  • Damaged carburetor
  • Broken exhaust gas recirculation
  • Spoiled fuel pump
  • Faulty spark plug
  • Vacuum issues
  • Throttle bore problem
  • Bad gasket

Fuel filter clogged

Starting with today’s list is the most common reason for a lot of car problems, a clogged fuel filter or air filter.

As the name implies, the purpose of the fuel filter is to clean the gasoline before it enters the engine. It doesn’t matter how carefully you are driving; Car air filters can and will eventually become clogged with dirt and debris, especially when left unchecked.

The next scene is your car engine running out of oxygen, making it an anoxic car engine capable of shutting down at full power at any moment. Worse still, a dirty fuel filter can cause the operator to idle poorly. The question here is, what should you do to solve this car puzzle? There are several approaches you can try.

But let us tell you the simplest way: Use a flashlight or other light source to illuminate the air filter. You may have a clogged air filter if the lighting isn’t specific enough or even dim. When you know that the air filter in question is faulty, all that’s left to do is replace it with a new one.

Air control valve problem

The idle air control valve is part of an automobile that regulates the operation of the engine when idling. This valve regulates the amount of air entering your vehicle. When the car starts idling, you don’t need as much airflow as when you are actively driving.

When you press the gas, you open the throttle plates that allow the flow of air to enter the inside of the engine and cause the reactions necessary to get the car moving and increase the car’s speed.

As such, if there is something wrong with the air conditioning valve such as the valve being excessively clogged or eventually breaking, your car will not be able to move when you press the gas. In older models after about 70,000 miles, the valve can become dirty and interfere with its function and cause your vehicle to stall.

Uneven and harsh idling can happen due to a dirty or stuck idling control valve. (Photo: Electro University)

Fortunately, there are some simple potential fixes. You can easily fix this by using a shop cloth and carburetor cleaner to clean it by hand. If you are not confident or comfortable doing this, watch online videos that show the process and experts can do it too.

Airflow sensor failed

So your car still starts but shuts down when you hit the gas. If you are wondering about this, you should think about checking the airflow sensor.

This sensor is a device that measures the amount of air entering the engine. The air filter is not far away. The airflow sensor will let you know if your car can keep the balance between air and air levels. Without it, your engine is unlikely to run smoothly and will instead hang suddenly.

In another case, if this sensor is misbehaving or not tracking, there are a few issues you can fix. However, don’t worry too much because you may always get a warning signal through the check engine light. Either way, however, the car will likely need to go into the shop for repairs.

Damaged carburetor

The up-and-coming cause of your car idling but stalling is your carburetor is clogged or damaged. The carburetor is usually the area that combines gasoline and air to activate the engine. So if this part goes wrong, the engine cannot burn fuel efficiently, causing the entire vehicle system to malfunction.

In general, this problem seems to be quite serious because it is directly related to the fuel combustion mechanism in our cars. But in reality, it’s very unlikely that the average driver will notice that a damaged carburetor is the cause of the car stalling. Because when this happens, most of us will immediately connect the cause to the failure of the accelerator because that is where we press to increase the throttle used for performance. Think that if the car stalls, maybe the pedal is the problem and the carburetor is the only fault.

Luckily, figuring out if the carburetor is the culprit isn’t difficult, even if you don’t know anything about your four-wheeler. Simply locate the carburetor, then find out if it is clogged or dusty by removing it from the engine, and finally, use a gentle brush and cloth to clean the inside. And there you go to have the problem solved!

Broken exhaust gas recirculation

The exhaust gas recirculation valve is part of a diesel engine that controls how much exhaust is returned through the intake manifold. Because the exhaust is so hot and can disrupt your engine’s air-to-air ratio balance, too much or too little can affect the performance of your car.

Fortunately, a faulty EGR valve can be prevented by using high-quality gasoline, keeping the valve clean, and performing periodic checks.

Damaged fuel pump

If your carburetor engine stalls when supplied with air, there is a good chance that the fuel pump is faulty.

First, let’s learn the function of the fuel pump. This automotive division is responsible for transferring the adequate supply of fuel from the fuel tank to the engine. If the fuel pump is not working properly, the engine may take in less gasoline than it needs. When that happens, performance issues can appear at first and eventually the car won’t even start.

That’s why replacing them should be something you need to do regularly to keep your engine running efficiently. Otherwise, engine performance and fuel efficiency can be significantly affected if you leave them to stand still at the recommended intervals.

Faulty spark plug

Why does your car stall when being refueling? Another explanation for your car’s shutdown is probably a faulty spark plug.

As a result, this component will not be able to function properly if it blisters from operating at too high a temperature or becomes covered with debris such as gasoline, carbon, or oil. Such damaged or oiled spark plugs can even have more consequences than you might think.

Another explanation for your car’s shutdown is probably a faulty spark plug. (Photo: Jorge Villalba)

Most important of all, your engine can eventually shut down if the spark plugs are rusty or unclean because they fail to ignite the mixture of gasoline and air.

Vacuum problem

Imagine your car’s engine is like a big air pump. The fuel that has been compressed and ignited in conjunction with the air must be drawn into the cylinders for the engine to function properly.

Do you wonder about the way air get into the system? The answer lies in the butterfly valve, in which air can enter, creating a vacuum to power some additional equipment. However, if the vacuum leaks somewhere, it can lead to the engine being miss-ignited or even failing to start the car. Even the smallest one can affect the engine performance.

In most cases, a hissing sound and a bright Check engine light will appear as signs that you think the cause is a vacuum gauge leak.

Throttle problem

The engine idling well but stalling when turning on the throttle is another case worth considering. The throttle hole is an automotive part that controls the amount of air the accelerator pedal delivers to the engine. Similar to the air control valve, problems can arise after 70,000 miles because the part is dirty.

When your car is idling but stalls due to the throttle, the problem can be solved without much trouble. All you need to do is clean it yourself or have a professional repair it.

Bad pads (gasket)

The motor will have to work harder to generate power if the head gasket is damaged aka faulty gasket. Additionally, a blown head gasket can also lead to coolant loss in your car, which can damage the engine cooling system and exacerbate overheating problems.

Such extreme and diligent situations have a real risk of causing your car to stop while idling after being refueled.

FAQs About Car Idles Fine But Dies When Given Gas

How to fix when the car stops after refueling?

What should I do if my car idles but stalls while refueling? Sitting at a gas station and having trouble starting your car can be frustrating and embarrassing.

Worry no more because here we are going to give some actions that may be helpful for you.

  • Step 1: Try restarting the car. The first time may fail, but that doesn’t mean the second won’t work!
  • Step 2: Assess the battery connection by opening the hood. Try re-attaching connections if they are not secure.
  • Step 3: Take your gas out and start the car if the battery is low.
  • Step 4: Under no circumstances should the repositioning of the car be neglected. Make sure you are not blocking traffic if you feel more diagnostics may be needed.
  • Step 5: Tow your car away if you can’t uncover any more revelations.

What about you who have tried all these instructions, but nothing seems to be found? If that’s the case, get help from an expert to deal with the problem effectively.

Don’t take on more than you can handle because there’s a chance you’re running the risk of making things worse. (Photo: jcolarusso92)

Why does my car get bogged down when refueling?

When a car stalls when refueling, it may be due to too much air intake, not enough fuel, or engine failure. There are several potential causes, but to narrow down the problem, you need to take a close look at your motives.

To do this, turn off the engine, put on old clothes and gloves, and check your car for anything that could get caught in the cooling fan unit that decides to start working even when the engine is off.

Can bad gas cause idle problems?

Extreme idling can be caused by poor gas. Over time, gas degrades due to moisture or contamination from other particles, such as rust from the inside of the gas cylinder. Air with water inside won’t burn properly, and particles like rust can clog pumps, filters, or injectors in the fuel system, all of which can cause the engine to idle erratically.

How about old gas? Long-term gas storage leads to molecular separation of the gas from itself. Its flammable molecules are no longer evenly dispersed to allow for optimal combustion, or they have evaporated completely.

Conclusion

Surely you already understand the most common causes of the car idling but stalling when refueling, as well as how to solve these problems. Hopefully, this guide on the issue of car idles fine but dies when given gas can assist you in identifying and resolving the exact matter causing the problem.

For more Car maintenance notices, follow Car From Japan today!

Matsumoto Naoki is senior car blogger at Car From Japan. Having background in mechanical engineering, he has a unique perspective on a lot of new car innovations. Prior to Car From Japan, Matsumoto was Mechanical Design Engineer at Yajima Plant, Subaru Corporation. His articles provide detailed DIY instructions and how-tos to help you get your new car on the road. If you want to save money and feel more confident when working on your cars, you should not ignore Matsumoto’s sharing posts. He presents driving tips and tricks for everyone through easy-following steps and mechanically but friendly writing.

Comments