You’re out on the open road and your tire goes pop. You pull over to change it but wait, there’s no jack! What do you do?
No worries though; you can still fix it if you know how to lower spare tire without tool. It can be done in a few simple steps without using any heavy or expensive tools.
Contents
- How to Lower Spare Tire Without Tool
- FAQs on Lowering Spare Tire Without Tool
- Can I lower a spare tire using household tools instead of the factory kit?
- Why does my spare tire cable lower halfway and suddenly stop?
- Is there a way to lower the spare tire if the access hole is damaged or missing?
- Why do some SUVs need a special tool while others don’t?
- Why does the spare tire lower but refuse to come out from under the vehicle?
- How often should I lower and inspect my spare tire even if I never use it?
- Why do some drivers discover their spare tire is missing only during an emergency?
- Conclusion
How to Lower Spare Tire Without Tool
Most people think that they need heavy tools to lower down a spare tire but all you need is two basic tools: an ignition key and a jack kit.
Follow these steps to learn how to get a spare tire down without the tool.
Step One: Park the Car
The place where you are going to lower the spare tire should be flat. To keep the car stable while you are lifting the spare tire, place a wheel chock just behind one of its rear wheels.
After doing that, apply the handbrake and make sure that the emergency lights are on. Put into gear (if manual) or parking mode if automatic – this will be necessary to stop the car from running on a sudden.
Step Two: Find the Spare Tire
It should be just below where your driver’s seat would be if you were sitting in it. There should be a license plate on the car’s passenger side.
Underneath the plate, you will find a rectangular plastic cover. Removing it will expose a key entrance, which makes sure that your car has a spare tire.
Step Three: Use the Ignition Key
Once you have located the position of the spare tire (which is behind the tow hitch bar), position yourself underneath the bumper to get easy access to the tire. A bulge under the bumper is the spare tire that you are going to lower.
Now, insert the ignition key into the keyhole beneath the plastic cover. Apply a little force to drag the key towards you, so it gets detached from the hole.
This will help with attaching the jack assembly to the car’s rear side.

Step Four: Use the Jack Kit
Get a crowbar and about two rods of the same size. One should have a wider head than the other. This broader part is known as the “female” end.
You will have to insert this “female” part of the rod into the hole you created in the previous step. It has to fit snugly in there like Cinderella’s slipper.
Step Five: Use the 2nd Rod
In this step of how to lower spare tire without tool, you have to use the second rod and connect it to the first one that has to be inserted into the hole.
Fit the second rod to the female-end rod to get enough space for connecting the pulley’s male end to the first rod. Doing so will also create the required space for you to detach the bumper.
The attachment between the first and second rods should leave no gap. It has to fit perfectly to move to the next step. Now, insert the female end of the first rod into the hole.
SEE MORE: 9 Steps to Change a Tire By Hand
Step Six: Attach a Crowbar to the Second Rod
When one end of the rod fixture is inside the hole, the other end should stick out of the bumper. Attach it to a crowbar and rotate it in an anti-clockwise motion.
This will move the pulley and slowly detach the spare tire from the bumper. You will need to keep doing the anti-clockwise rotation until the tire lands on the floor.
Then, you have to remove the spare tire completely from underneath the vehicle. Apply force to separate the rim from the pulley carrier.
Now, you are done. You have lowered down and separated the spare tire without using any heavy tool.
Important Tips to Note
Not all vehicles are the same. There could be differences in designs between one model to another. A vehicle’s exterior and interior features could be different depending on its make and the year model.
Unless your vehicle is too old, the above-mentioned steps of lowering the spare tire will be applicable to your car model. The location of the tire could be in a different place but the removal process will be the same.
If nothing works, don’t hesitate to call for a technician. A professional is the best person to do this safely if you are a complete noob.
FAQs on Lowering Spare Tire Without Tool
Can I lower a spare tire using household tools instead of the factory kit?
Sometimes. A socket wrench with the correct extension, breaker bar, or even a lug wrench combined with an extension pipe can work if it fits the spare tire winch mechanism.
Why does my spare tire cable lower halfway and suddenly stop?
Rust, dirt buildup, or a safety catch mechanism may be preventing full release.
Many underbody spare systems have a secondary lock designed to stop the tire from falling unexpectedly.
Is there a way to lower the spare tire if the access hole is damaged or missing?
In some vehicles, removing nearby trim panels or reaching the winch from underneath can work, though access varies greatly by model.
Why do some SUVs need a special tool while others don’t?
Manufacturers use different anti-theft and safety designs. Some systems use unique adapters to prevent theft of underbody-mounted spare tires.
Why does the spare tire lower but refuse to come out from under the vehicle?
The tire may be tilted incorrectly, caught on suspension parts, or still attached to a safety retainer in the center of the wheel.
How often should I lower and inspect my spare tire even if I never use it?
At least once or twice a year. This keeps the hoist mechanism from seizing and lets you check tire pressure, rust, and cable condition before an emergency happens.
Why do some drivers discover their spare tire is missing only during an emergency?
Underbody-mounted spares can be stolen or accidentally removed during repairs without the owner noticing because they’re hidden from view.
Conclusion
The process of how to lower spare tire without tool is not quite straightforward or overly complicated.
An amateur may struggle a bit in grasping the steps but there is actually nothing to be worried about. Since there is no involvement of heavy tools, you will be able to get the hang of it after putting in some effort.




