Car TalkCar MaintenanceHow To Clean a Car CD Player: Easy DIY

How To Clean a Car CD Player: Easy DIY

There’s nothing more frustrating than putting your favorite CD in and having it skip, stop, or not play at all. Before you toss the whole thing and go shopping for a new stereo, the problem might be something super simple: a dirty CD player.

Luckily, you don’t need to be a car expert to clean it yourself. With a few simple tools, you can get it working like new again. Let’s find out how to clean a car CD player easily.

How to Clean a Car CD Player: Easiest Method

Manual cleaning of a car CD player is quite laborious because you have to disassemble the entire unit.

So, cleaning the lens means you have to dismount the CD player and then dismantle all the parts, which could be difficult for a person without any technical knowledge.

So, we are going to apply an easy method that does not involve doing all these tasks. This DIY method will cost less than $10.

Required Items

  • An audio CD. It can be an old disc, but it has to be really clean. It will be damaged in the process of cleaning the CD player, so it must be something that you can spare.
  • The tube of glue (possibly industrial strength)
  • A piece of soft microfiber cloth
  • A measuring tape
  • The whole process will be done in two sections: preparing the CD and cleaning.

Section 1: Preparing the CD

  1. Even if the CD is already clean, you have to clean it again to make sure that there is absolutely no dirt on it. Wipe both surfaces of the CD with a soft cloth.
  2. Measure the length of the main printable area (the shiny part) of the CD. Matching that length, cut two strips from the microfiber cloth. The width of these strips should be ¼-inch.
  3. Apply a thin line of glue along the length of the main printable area. Then, put one strip of the microfiber cloth on that glued line.
  4. Press the strip to the disc with a toothpick. Scrape the cloth with the toothpick to remove the loose fibers. This surface should be fluffed up because this is the part that will do the actual cleaning of the lens.
  5. In parallel to the first line, apply another line of glue to the other side of the disc. Then, repeat everything you have done in step IV.
  6. Wait until the glue is completely dry. Any liquid can cause significant damage to the lens and other parts of the CD player.
how do you clean a car cd player
Cleaning the lens will require a spare CD. (Photo: istockphoto)

Section 2: Cleaning the CD Player

When the prepping is done, the cleaning does not involve much work. All you have to do is insert the disc into the CD player and wait for a couple of rounds of spinning.

The player will eject the disc after a few seconds because of the cloth strip attached to it. Insert disc again and repeat this process 4 to 5 times. Now, play the player and insert a working CD to see if it is still skipping.

If the problem is still there, insert the previous CD a couple more times. This is how to clean a car CD player!

FAQs on How To Clean A Car CD Player

Is using a CD lens cleaner always safe for car players?

Not always. Some older or sensitive units can be scratched by low-quality cleaning discs. It’s best to use trusted brands or manual cleaning if possible.

Why does my CD player read some discs but not others after cleaning?

It may not be dirt. Your laser could be weakening, or certain discs (burned CDs, scratched discs) are harder for aging readers to detect.

Why does my CD player make a clicking or whirring noise after cleaning?

This could indicate that debris has shifted inside, or the laser mechanism is struggling to recalibrate, not always a cleaning issue.

Can compressed air be used to clean a car CD player?

It’s risky. Blowing air into the slot can push dust deeper into the mechanism instead of removing it, potentially worsening the problem.

Can a weak car battery affect how well a CD player reads discs?

Indirectly, yes. Low voltage can cause the laser or motor to operate inconsistently, mimicking symptoms of a dirty lens.

Is it worth cleaning a CD player in modern cars, or should you just replace it?

If the issue is minor (dust or residue), cleaning can restore performance. But if the laser is worn out, upgrading to a modern head unit may be more practical.

how to clean a car stereo cd player
Learn how to clean a car stereo CD player here! (Photo: istockphoto)

Conclusion

That’s all there is to it. A little maintenance goes a long way, and now you have a simple way to get your CD player working again.

You don’t have to put up with skipping or freezing music anymore. With a quick cleaning, you can get back to enjoying your favorite songs, hassle-free.

Tsukasa Azuma
Tsukasa Azuma
Tsukasa Azuma is the resident car expert at Car From Japan. He owns a car repair shop in downtown Osaka, and his years of hands-on experience shine through in his informative blog posts. Tsukasa provides top-notch car maintenance tips and keeps readers up-to-date on the latest trends in the auto industry, offering a unique and insightful perspective on everything car-related. His blog has become a go-to resource for anyone wanting to keep their car in top shape.
RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

referral program

Most Popular