Car TalkCar MaintenanceCar BrakesHow To Check Brake Pads: Made Easy

How To Check Brake Pads: Made Easy

One day, the mechanic checked your brake system and told you that your brake pads were at 4 millimeters and you needed to replace the pads because it was dangerous to be driving. Fear or not? So how to check brake pads by yourself to know when your car needs a new one? Luckily, checking brake pads is quite easy, and this article will show you how to do it in a few simple steps.

Why Brake Pads Matter? 

Brake pads are perhaps one of the most important safety parts of our vehicle, so it’s important to understand them. A typical brake system consists of a pair of brake pads, a brake disc, and a brake caliper for each wheel. The pads are installed in the caliper with their friction material almost touching both sides of the brake disc.

When you press the brake pedal, hydraulic fluid in the caliper pushes each brake pad against each side of the rotating brake disc. This results in friction that slows and eventually stops the vehicle. When you think about how many times this simple action takes place every day, every week, every month, and every year, it’s no surprise that brake pads gradually wear down, so they need to be replaced regularly.

Any vehicle can lack this important part. Not having brake pads means your car is always at risk of an accident. Because of that, they play a very important role in the structure of cars.

Brake pads are more susceptible to being worn out and are replaced more frequently than brake discs, so drivers need to pay attention to and regularly check this part to ensure safety while driving.

How To Check Brake Pads: Step-By-Step Guide

how to inspect brake pads
How to inspect brake pads (Photo: istockphoto)

Some drivers are still not properly aware of the importance of the brake system. Even though they take careful care of their cars, regularly changing oil, coolant, or checking tires… They easily forget about the car’s brakes, especially brake pads. Brake pads are an extremely important part of the safety of vehicle operation, but over time, the brake pads will gradually wear out and need to be checked due to the constant friction and heat they endure. So that’s why checking brake pads is an important process to avoid potential risks while driving! 

What will you need to get started?

The good news is that you don’t need a whole garage full of tools to check the brake pads. Here’s a list of basic tools required:

  • Flashlight: A torch is the most useful tool when checking sometimes dark nooks and crannies in the brake system. 
  • A gauge or a ruler to read the thickness of the brake pads.
  • Safety glasses: Always a good idea when working around your car 
  • A set of gloves can keep your hands clean, if possible
  • A jack (if you need to remove wheels): Used to lift and support wheels.

Get ready to inspect your brake pads:

Method 1: Check brake pads without removing wheels

Notice the signs of bad brake pads

You can check and know the health of your brake pads without removing the wheels by recognizing the symptoms of a worn brake pad. So how to tell if brake pads are bad:

  • Your car makes a strange noise when braking: If the brakes make a noise every time you step on the pedal, the cause may be due to worn brake pads. Usually, these sounds will be squealing or clicking sounds.
  • The steering wheel vibrates: When braking, if the steering wheel shows signs of vibrating, there is a high possibility that the brake pads are worn out.
  • The brake warning light turns on: Modern cars all have sensor systems and warning lights, including brake pad warning lights. When the brake pads are worn beyond the standard, the warning light will turn on.

If one of these symptoms happens to your car, you should take it to the mechanic ASAP to have brake pads checked and replaced promptly. 

Visually inspection

Sometimes there can be a lot of sounds coming from the wheels, which can make you confused about whether or not your brake pads need to be changed, so we need to visually check.

In many cases, checking brake pads visually can be very simple. Some vehicles have really good access to see the caliper in the rotor. They have big open ports like some sports cars, so that you can easily observe the caliper and where the pad touches the rotor. It’ll be a solid block of material. 

Tip: Shine your flashlight in for a clearer view. You’re looking for a thickness of at least ¼ inch. If it’s less than that, it’s time to replace your pads. 

what are brake pads
What are brake pads (Photo: istockphoto)

However, not all cars are built the same. If your rims block your view, fear not! Here’s another way to check:

Method 2: Check brake pads by removing wheels

This method will require more steps compared to method 1; however, it will give a more exact result to help you know when to replace brake pads:

Step 1: Park on a level surface, engage the parking brake, and then use a jack to lift the car to remove the wheel and observe the brake pads more easily.

Step 2: To observe and determine the thickness of the brake pads, you need to remove the wheel. Based on the weight and grip of the tire, loosen the lug nuts and bolts.

Step 3: Take the caliper off so we can get a better look at the inside brake pad. 

Step 4: Thickness check: When reaching the brake pad, just take a flashlight to check both the inner and outer pad visually. If you notice the friction material is close to 2-3 mm worth of thickness, or you see the brake pad wear indicator (a thin metal strip) It means your pads need replacement. Don’t forget to check the condition of the brake pad; make sure it is not cracked or broken, and is thick enough to use safely.

Step 5: Repeat these steps to inspect the other wheels after inspecting one side

Step 6: If the brake pads show no signs of wear, use a specialized brake pad cleaning solution to wash off dirt, grit, and sand on the brake pads and discs, then reassemble the wheel. 

Now, you’re all done!

Watch more: 

Conclusion 

Checking your brake pads isn’t nearly as intimidating as it sounds. Once you know what to look for, it only takes a few minutes of your time and can save you a lot of money on future repairs. By catching thin pads early, you prevent damage to your rotors and, more importantly, you keep your car stopping exactly when it should.

Next time you’re washing your car or checking your tire pressure, take a quick peek through the wheel spokes. If the pads look thin or you start hearing a high-pitched squeak, don’t wait. Replacing them now is a simple, routine task that keeps you safe and your car running smoothly.

Matsumoto Naoki
Matsumoto Naoki
Matsumoto Naoki is a senior car blogger at Car From Japan. With a background in mechanical engineering, including experience as a Mechanical Design Engineer at Subaru Corporation, he offers a unique perspective on automotive innovations. Matsumoto's articles provide clear, DIY-friendly instructions and how-to guides to help you confidently maintain your car and save money on repairs. His approachable writing style makes even complex mechanical topics accessible to everyone.
RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

referral program

Most Popular