If you are driving, car dents and scratches are pretty certain. Even if you take full care and attention to avoid any damage, you cannot guarantee what happens in parking lots, with footballs, sudden appearances of light posts, and shopping carts.
But every time it is not required to take your car to an auto body shop for fixing and removing dents. Many times, dents and scratches are pretty minor ones. So, why spend 100-200 dollars for the same? To help you fix car dent at home, here are some DIY methods for you.Â
Contents
4 Simple Ways to Fix Car Dent at Home
With some available tools in your house, fixing minor damages is now easier than you ever thought.
1. Removing dents with a plunger
Removing dents with a plunger is an effective method that many people use to fix car dent at home. Other than unclogging drains, plungers can also fix medium-sized car dents. What you need to do is put some water in the dent and a plunger cup. Now make the plunger do its suction work by pushing and pulling, till the dent pops out.Â

Make sure that you use the cup plunger, which is made for sinks, not the flange one for toilets. Remember, if the car dent is bigger than a plunger cup or a bit complex, the trick may not work effectively. If the dent is reasonably small or medium, plunging firmly will bring your car back to normal in a few minutes.
2. Removing car dents with boiling water
Do you know that boiling water is used to fix car dent? In the case of many minor accidents, the bumper is the part that bears the damage. For this, you might have to take the bumper off. All you need to do is pour hot boiling water on the bumper dent.
As soon as pouring is done, try to pop in the dent from behind. Since the dent area would have expanded with heat, it is easier to return it to its original shape. Keep dumping boiling water till you are done. If you are finished with popping it back into the shape, pour some cold water over the area to shrink it back into place.
Watch the video below to know how to fix car dents by using a plunger and boiling water:
3. Using hair dryer to fix car dent
Next, we will guide you on how to remove dents with a hair dryer. To do this method, you need to prepare two tools: a hair dryer and compressed air. Switch on the hair dryer and set it to its highest temperature.
It will expand the car surface, and as soon as it gets hot enough, turn the can of compressed air upside down. Keep spraying, and because of the contraction, the dent will pop out. Wipe the liquid residue of compressed air very gently with a clean and soft cloth.
Another option is to heat the dent with a hair dryer, and then place an aluminum foil over it. Wear heavy-duty gloves and start rubbing some dry ice across the foil until you hear a pop sound. It generally takes a few minutes. Once done, remove the foil and dispose of it in the trash.

4. Using a vacuum cleaner & pot
Professionals use suction to pull out a dent. You can also do the same if the puller has the correct amount of suction power. What you need is: a bucket or pot, a vacuum cleaner, and a tape roll. If used correctly, this can be a big help in fixing a car dent.
To take off with this method, make a small hole under the pot or bucket, tape it around the car dent, and place the hose of the vacuum cleaner over the hole. Now, switch on the vacuum cleaner. The created suction will pop out the dent.
Did you enjoy our article? Feel free to share these methods with your friends, and in case you have any questions related to this topic, leave them in the comment section. And don’t forget to follow us to get more car maintenance tips updated every day by automobile experts. Â




