Hydraulic Clutch Vs Mechanical Clutch- The Comparison
The clutch is the main component that makes the car drive smooth. The clutch is used in shifting the gears soothingly while driving the vehicle. It resides in the gearbox for proper transmission between the engine and paddle.
There are two types of clutches discovered now, hydraulic clutch and mechanical clutch. Both these clutches have a similar procedure of working in disengaging the gears while driving.
In traditional clutches, there is a cable wire attached to the engine, flywheel, and gearbox. Whereas, the cable wire is replaced with small bore pipes in the hydraulic clutches. Let us explore more about the hydraulic clutch vs mechanical clutch below.
What Is a Hydraulic Clutch?
A hydraulic clutch in a car is a type of clutch system that uses hydraulic pressure to engage and disengage the clutch. It consists of several components, including a master cylinder, slave cylinder, and hydraulic lines.
When the driver presses the clutch pedal, it activates the master cylinder, which converts the mechanical force exerted by the pedal into hydraulic pressure.
This pressure is then transmitted through the hydraulic lines to the slave cylinder, located near the clutch assembly. The slave cylinder, in turn, uses hydraulic pressure to engage or disengage the clutch mechanism.
Mechanical Clutch: What Is It?
A mechanical clutch in a car is a type of clutch system that uses mechanical linkage to engage and disengage the clutch. It typically consists of three main components: the clutch pedal, clutch fork, and release bearing. When the driver presses the clutch pedal, it activates a mechanical linkage that connects to the clutch fork.
The clutch fork, in turn, applies force to the release bearing, which then disengages the clutch. This action separates the engine’s power from the transmission, allowing the driver to shift gears or come to a stop without stalling the engine.
Hydraulic Clutch vs Mechanical Clutch- The Comparison
One can come across a lot of pros and cons of both these clutches. Most car companies have started to go with hydraulic clutches because of their durability and efficiency. The mechanical clutches consist of steel wires that might tear apart after a certain age.
But, there is a huge risk of master cylinder leakage in hydraulic cylinders. Therefore, this states that both of these clutches have advantages and disadvantages of their own.
Let’s find out some differences between the hydraulic and mechanical clutch
1. Price
While going for any type of clutch in the car, one must look around the price as well. The cable clutch costs low than that of hydraulics.
This is because the mechanical clutch is made up of cable wire, which is easy to maintain and set up. Whereas, the hydraulic clutches comprise bore pipes, master cylinders, small cylinders, and fluid. One can go for the clutch as per the requirement. Let us discover more about the hydraulic vs mechanical clutch.
2. Maintenance
The cables require a lot of maintenance than hydraulics. For instance, if the cable wire gets loose after a certain period, one might not get the complete disengagement like before. One might damage the clutch plates if not noticed on time.
In hydraulic plates, things are a little different. The hydraulic clutches never ask for maintenance very easily. This is because of the fluid that self-adjusts the clutch plates when required.
One does not have to adjust the clutch or worry about the greasing of the wire in hydraulic clutches. The expert’s maintenance tips assist a lot for the better safeguarding of the car.
3. Eminence
The hydraulic clutch combats the mechanical clutch in terms of quality as well. The cable wire clutches are vulnerable to corrosion and can break easily after aging. The mechanical clutch requires lubrication periodically.
And, these might get struck if the wires get bent too piercingly. You do not have to worry about all this stuff in the hydraulic clutches. These are easy to modulate and consist of fluid to work.
One might have to replace the fluid after several years for better performance. The hydraulic setup is a little expensive if the seals of cylinders leak in any case. But, hydraulics are much better in terms of quality.
Read more:
Watch more:
Wrapping Up
So, these were some factors where we discussed hydraulic clutch vs mechanical clutch. You can go for the one that suits your car and pocket well.