How To Use A Car Dent Repair Kit In 4 Easy Steps
You can fix dents on your car by either taking it to an auto repair shop or fixing it at home by using a car dent repair kit or other tools. If you have a repair kit and proper instructions on how to do it, you can do the job at home at a fraction of the cost of what the servicing shops would charge.
How To Use A Car Dent Repair Kit
While using vehicles, unwanted dents on a car’s body will inevitably occur due to careless collisions or being hit by foreign objects. Therefore, the first thing that will pop into your mind is to take your car to the garage for repair and restoration. Garage mechanics will use specialized machines to repair dents depending on the severity. However, for light dents, you can repair them by using the dent repair kit.
There can be various types of repair kits where you’ll find tools like suction cups, pullers, rods, hot glue, etc. A traditional method of fixing dents is to use the dent puller. Let’s take a look at how to fix car dents by using such a kit.
Materials For Auto Body Dent Repair
- A dent puller kit (You can buy it easily online)
- Suction dent puller
- A flathead screwdriver
Read more:
Steps for do-it-yourself dent repair
Follow these instructions for doing a DIY dent repair at home:
Clean the area
The first step is to clean the damaged spot and its surrounding area. Rub thoroughly after using a cleaner and then rinse the place with fresh water. Dry the place with a piece of cloth. Cleaning the area of dirt and possible paint scrapes will help the suction cup adhesive to stick more firmly.
Apply the adhesive
Next, connect the glue gun with the power and warm up the glue.
Set the dent puller according to the instructions on the package and then use the glue to the suction pads. Remember that you need to use only a thin layer of the adhesive.
Put the puller on the dent in a position where the center pad sits in the middle of the damaged area. Let the other pads clasp firmly around the edge of the dent. Hold them there for five minutes and then leave the puller there for six hours. It will let the adhesive dry and get attached to the dent very firmly.
Pull the dent
When it’s finally time to pull the dent, start turning the middle pad in an anticlockwise direction. Do it slowly; otherwise, you may break the adhesive bond. Keep turning until the dent is popped back to the previous place.
Break the adhesive
Turn the other pads to break the adhesive bond and remove the pads from the car’s surface. There can still be a little adhesive left sticking to the surface, but you can remove that by using a flathead screwdriver. Besides, if the glue sticks too tightly, you can use alcohol to remove it.
Scrape off the adhesive and then want the area again with a cleaner. Dry the place and then apply primer and paint to give the finishing touch.
The suction cup is another type of car dent repair kit that you can use for quick fixing of your vehicle. These repair kits are not expensive and easy to use. So, they will save your money and the hassle of taking the car to an auto repair shop.
If you want to find more about how to repair a dent, let’s see the video below:
How Much Does It Cost To Repair A Car Dent?
If you choose to fix dents at home, although it will save money, it will take time and probably not be 100% effective like going to a mechanic. If not done properly, it can cause greater damage and cost more money.
Different professional dent repair facilities will have different competitive prices. You can refer to prices at professional auto care centers. Prices may vary depending on machinery, equipment, and technician skills. Normally, the costs will range from $125 to $500 or even more.
Facilities that are invested in modern equipment and machinery systems will fix dents on your car perfectly, although the price will be a bit higher.
Note:
- Do not let your car have too many dents before taking them for repair.
- Don’t let the dent become too large.
- Don’t let the dent get worse while still using your car regularly.
- Choose professional car dent repair facilities.
We hope that all these guides on the topic will be useful for you to fix dents effectively. Let’s follow other topics on our site to gain more knowledge.