Why Windshield Wipers Won’t Work? Finding Where The Problem Lies

You are driving in heavy rains, and it starts to get dark outside. Your windshield wipers are helping you get a clear vision of the road ahead, but suddenly the wipers stop moving to and fro. A disastrous situation, isn’t it? The wipers are essential for safe driving, and when windshield wipers won’t work, you need to look for the cause of the problem to avoid dire consequences.

Why Windshield Wipers Won’t Work?

Have you ever witnessed windshield wipers stopped working while driving or aren’t moving in synchronization? This is because of some underlying errors that restrict the normal functioning of the wipers. What are these errors? Let’s find out!

1. The Faulty Wiper Control

When you feel the need to clean the windshield, you usually turn on the wipers using a common control regulator. This is the same regulator that also controls operation of turn signals, high beam lights, and even controls headlights. If the situation arises where the wipers fail to work, there could be a problem with its control plug.

This issue is the easiest to detect! If there is a fault in the controlling gear, the turn signals or headlights would also stop working. To get the problem fixed, one would have to visit a mechanic who would address the issue effectively. This is one reason why the windshield wipers won’t work, let’s look further into other possibilities.

         SEE MORE:

Steps to resolve the problem why windshield wipers won’t work
Detect issue why windshield wipers won’t work (Photo Source: picfair)

2. Torn Wiper Blades

You must be aware that it is the condition of your wiper blades that decides how well your wipers would work. In short, if the rubber edges of the wiper blade get torn over time or due to an accident, problems would occur. This is because the wiper blade would not be able to make an effective contact with the windshield.

In turn, the debris or water accumulated on the glass surface would not be cleaned away instead the windshield would become vulnerable to scratches. It is highly recommended to replace the wiper blades so as to prevent greater damages later. Refer to maintenance tips for the DIY process for replacing wiper blades.

3. The Blown Off Fuse

Sometimes a pressure may develop in the windshield motor. This, in turn, leads to the fuse blowing off. In such a case, the motor restricts the transferring of power to the wipers that further results in their improper functioning. The symptoms of such a scenario are dead wipers that wouldn’t move a bit or produce any sound when turned on.

If there is a fuse blow off, check for any obstructions on the wiper blades. Like snow accumulation on the wiper blades, or them being tangled with any object could lead to fuse burn out. When windshield wipers not working properly is an issue you face, visit a professional and get it replaced in the soonest manner possible.

>> Are you interested in buying a used car from Japan? Click here <<

4. The Ruthless Winters

If you happen to live around places that face extreme winters with heavy snowfall, your car wipers are likely to suffer. While you may be enjoying the snowballs coming down from the infinite sky, it may not prove to be good for the wipers. Heavy snowfall results in bent windshield blades, malfunctioned wiper arms, blown wiper fuse, or issues with the motor.

To avoid such circumstances, you could go for robust and weather resistant blades such as the premium beam winter wiper blades. These are tried and tested blades that stand the tests of time and sustain freezing weathers.

Common reason for why windshield wipers won’t work
Mistake for windshield wipers won’t work (Photo Source: automotiveten)

How to fix broken wipers? Check out the video below to see in detail: 

Wrapping Up

These are the four reasons behind why windshield wipers won’t work. Be it a mechanical failure, an electrical failure, or even a hardware failure; never ignore the need to visit a mechanic. This is like a precautionary step that you take for your safety.