How to Use Car Jack Stands Properly

Car jack stands are designed to support a vehicle after lifting it up with a floor jack. They are a common tool that you’ll see in every auto repair shop and the garage of amateur weekend mechanics.

You should know how to use car stands properly. It is necessary for your safety while doing the routine maintenance or repairs of your vehicle.

Car Jack Stands: How to Use the Tool

You’ll need jack stands, a floor jack, and four chocks to use a car jack stand for any repair or maintenance work.

Park the car.

The first step of using the car stands is to park the vehicle on a solid, flat surface, which is free of debris. Otherwise, an uneven or soft surface can cause the stands slip off, which can result in a serious accident or fatal injury. Make sure you’ve used the hand brake or parking brake to keep the vehicle stationary.

car jack stands

Use wheel chocks.

If you’re going to work on the front side, use chocks on both sides of the rear tires, and vice versa. The chocks will keep the vehicle in place and prevent sudden rolling or sliding.

Identify the jack points.

Jack points are the strongest areas in a vehicle. These points are capable of holding the weight when the vehicle is lifted. Check the user manual provided by the car manufacturer for finding out the jack points before using the car jack stands.

Lift the car with a floor jack.

Place the floor jack under a jack point at the side where you are going to do the work. Hoist the car to the point where you can comfortably do the repair or maintenance job.

Place the jack stands.

Once you’ve lifted the vehicle, place the jack stands underneath the jack points. Adjust the height so that the car is tightly sat in the stands. If needed, lift up or lower the floor jack to get the proper height.

car stand jack

Take off the floor jack.

Once you set the jack stands in their positions, take off the floor jack slowly. Then, give the car a little push to make sure it sits securely and tightly on the car jack stands.

Now, you can start working underneath the car. Knowing how to set up jack stands under the car correctly will make it easier doing lots of small maintenance and repair jobs by yourself. However, you should always take all the precautions and safety measures before crawling up under the car.

To stay completely safe and risk-free, place large wooden blocks near the jack points. They will protect you in case the jack stands fail.