Tire Pressure Sensor Reset – This is How To Do It!
Tire pressure sensors help you to warn about the under-inflated or over-inflated tires in your vehicle. There are basically two kinds of tire pressure monitoring system – Direct TPMS and Indirect TPMS. Both of them check the pressure in each tire of the vehicle and aware the driver about low tire pressure, preventing unsafe driving situations. There’s a need of resetting this sensor with time to ensure safety conditions. But how? To help you out, here’s are some ways that will guide you on ‘tire pressure sensor reset.’
Tire Pressure Sensor Reset: Essential Ways to do it
To reset the tire pressure sensor so that it can function properly, here are a couple of ways that you can adopt it. Let’s explore it one by one.
1. Identify the type of TPMS
The first step you need to perform is to identify whether your vehicle possesses a direct TPMS or indirect TPMS. In case your car has a direct system, retuning the sensors may be as easy as pressing a reset knob on the dash. On the other hand, if it has an indirect system, resetting the sensor may require the use of scanning tool or a magnet.
If you are not aware of the tire pressure monitoring system your car has, you can read on car maintenance tips by auto experts to identify it.
2. Get your Tires Inflated
- Safety tire pressure sensor reset
Ensure that each tire of your car is properly inflated. Keep in mind that you are putting the sensors on “zero” so all tires should be properly inflated. If not, the sensors will fail to calibrate appropriately and their readings would become inaccurate.
3. Monitor the Battery
See if your vehicle makes use of a battery to power up the sensor. If yes, make sure it is not deceased. It is recommended to change your car’s battery after every five years. At times, you may require replacing the whole sensor system to ensure the safety of your vehicle.
4. Readjust the Transponders
Each wheel possesses its transponder. When you rotate the wheels, it alters the position of every responder and the tire pressure system should learn their latest locations. So, it’s a nice idea to amend valve stems in case you are getting fresh tires.
>> Buy a high-quality used car at best deal from Japanese authorized dealers here <<
5. Make Use of Magnet method
Try to push both the buttons- lock and unlock that are present on the key fob with the key on and the engine off. Now, put a magnet over every valve stem unless and until the horn chirp for each one in the order, which is:
Left front, right front, right rear, and left rear!
6. Utilize the Scan Tool Method
You can also chase the TPMS Reprogramming process that is mentioned in the car owner’s manual if the sensors are not replaced.
- Guide for tire pressure sensor reset
So, your problem of “tire pressure sensor reset” has been solved now. Don’t forget to follow the above-mentioned steps the next time you need to reset your vehicle’s tire pressure sensors.
>> Read more about Car maintenance tips, click here!