How To Turn On Your Headlights And The High Beam In 10 Minutes!

The high beams allow the driver to see ahead of the road so as to prevent any of the upcoming troubles. Thankfully, you do not need any special tool or training to know how to turn on high beams.

You just have to learn how to use the high beams properly, which is super easy.

The Simple Procedure To Learn How To Turn On High Beams

The headlights and high beams are essential to let other cars know about you in the dark and in low visibility. Let us begin with understanding the simple procedure by making use of these simple steps!

1. Locate The Switch Of Headlight

Most importantly you must be sure about the location of your headlights in your car. Generally, the headlights are located at the end of the blinker lever. 

However, this position may vary depending upon the model of your car. You may find the blinker liver on the left side of the steering wheel.

Besides, you also need to know the position of the headlight switch in your car. Make sure you know the exact location so as to make quick access to that at the time of emergencies.

>> Buy a high-quality used car at best deal from Japanese authorized dealers here <<  

2. Switch On Your Headlight Switch

The following step is to turn your headlight switch on from the options that it has. Generally, a typical headlight switch has the following 4 options:

• Off position; often represented by ‘O’ symbol
• Parking lights
• Headlights
• Auto option

You must be aware of this sequence to be sure of how to turn on high beams. The parking lights are mostly used by the driver when the running car is standing in the parking lot. 

You can also make use of these lights for making your car more visible without turning the entire headlights on.

It is advisable to turn on your headlights so that you catch the attention of the other car drivers and get protected against all the possible car accidents. 

You can also let your headlights be turned on during the daytime for better visibility of your car to others.

3. Turning On The High Beams

To turn on the high beams in your car, you again need to use the blinker lever. The very simple way of turning the high beam on is to push the blinker lever away from you. 

While pushing away the lever, you must feel the click to be sure that the high beams are turned on.

As soon as you feel the click, your car’s high beams are turned on. Further, when you are in need to turn off the high beams, you just have to bring the blinker lever back to the original position.

4. Turning The High Beams For A Shorter Time

When you are in need to turn your car’s high beam for just a few minutes or a shorter amount of time, you have another simple way of doing so. 

Just pull the blinker lever towards you and keep holding its position till the time you need your high beams on.

These are the simple ways of highlighting the necessary information on how to turn on high beams. 

Always remember to use the high beams and the headlights to provide the necessary visibility to your car. This will provide safety to you as well as to the other driver as well.

SEE MORE:

• 4 Ways HID Headlights For Cars Improve Your Driving.
• Headlight Repairs And Installation Tips.

Additional Safety Tips Concerning How To Turn On High Beams:

Besides the simple steps of how to turn on high beams, you must also keep in mind the necessary safety tips that will enhance the safety of your car. Care enough to know the additional safety tips? Here, have a look at the same:

1. Turn on your high beams only in areas where there are no streetlights or the place is extremely dark
2. Also, make sure that there is no oncoming traffic when you are using your car’s high beam
3. Always remember to change the intensity of the high beams from high to low when passing by other cars or when driving behind other cars
4. Do remember to turn off the high beam lights when not in use as it may disrupt the other driver’s vision due to their high intensity

FAQs

1. Are there any legal requirements for using headlights and high beams?

The specific laws regarding headlight and high beam use can vary by location. Generally, you must dim your high beams when approaching or following other vehicles to avoid blinding the drivers. Failing to do so can result in traffic violations.

2. Are there any safety tips for using headlights and high beams?

Always remember to dim your high beams when approaching or following other vehicles to avoid dazzling their drivers. 

Additionally, keep your headlights and high beams properly aimed to ensure they illuminate the road effectively without blinding others.

3. Can I use my high beams in the city or on well-lit streets?

It’s generally not recommended to use high beams in well-lit urban areas or on streets with other vehicles, as it can blind other drivers. Stick to low beams in such situations for safety and courtesy.

4. Are there any tips for adjusting my headlights’ aim?

Proper headlight aim is crucial for safe driving. You can adjust the aim of your headlights using the adjustment screws located near the headlights. 

It’s recommended to consult a professional mechanic or follow your car’s manual for precise instructions on adjusting headlight aim.

5. Why are my headlights dimmer than usual?

Dim headlights could be due to several reasons, including a worn-out or dirty headlight bulb, a weak electrical connection, or a failing alternator. Consult a mechanic to diagnose and fix the issue.

6. Do I need to turn on my headlights during daytime rain?

Many modern cars have daytime running lights (DRLs) that automatically turn on when the engine is running.

If your vehicle doesn’t have DRLs, it’s a good practice to manually turn on your headlights in rainy conditions to increase visibility to other drivers

Check out this video from ChrisFix to learn how to properly align headlights!

Isn’t it quite easy to learn how to turn on high beams? You must always be encouraged to learn about the usage of the high beams so as to be totally protected while driving in dark places.