CAR FROM JAPAN - Find best deals of used cars from reliable Japanese sellersSearch Car

5 Symptoms To Track When Driving With Bad Purge Valve

ByTsukasa Azuma-October 08, 2023

There is a system called an “evaporative emission control system,” that, in turn, holds a vapor canister purge valve. The valve carries the responsibility to regulate the amount of fuel vapor emerging from the charcoal canister. The purge valve is known to work in synchronization with the charcoal canister to recycle the emissions as they need to get eliminated through the internal combustion process. That is why; driving with bad purge valve can affect the engine.

Are you worried about how would you know that the valve has malfunctioned? Here are the five most common symptoms to track that signify that the purge valve needs repair/replacement.

What Is A Purge Valve?

The car purge valve, also known as a canister purge valve, is a component of the evaporative emissions control (EVAP) system in modern vehicles. The EVAP system is designed to capture and store fuel vapor emissions from the fuel tank and prevent them from escaping into the atmosphere.

The purge valve is responsible for regulating the flow of fuel vapor from the EVAP canister to the engine intake manifold. When the engine is running, the purge valve opens and allows the fuel vapor to be drawn into the engine and burned along with the fuel/air mixture. This helps to reduce emissions and improve fuel efficiency.

The purge valve is controlled by the engine control module (ECM) and is typically located near the EVAP canister or on the intake manifold. It is usually a small, solenoid-operated valve that opens and closes based on signals from the ECM.

If the purge valve fails or malfunctions, it can cause a variety of issues, including rough idling, stalling, and poor fuel efficiency. In some cases, a malfunctioning purge valve can also trigger the check engine light to come on. If you suspect a problem with your car’s purge valve, it’s best to have it diagnosed and repaired by a qualified mechanic.

Symptoms Of Driving With Bad Purge Valve

If you have a bad purge valve, the situation would be worse than a non-working charcoal canister. Here are the symptoms that could help you decide that it is the purge valve that has been creating issues.

1. The check engine light turns “ON”

While there are a dozen reasons that can lead to the illumination of the check engine light, a bad purge valve could be one of them. There are sensors present in the car’s system that track the working of the purge valve, and once the signals from the valve fail to transmit; an indication is a result. Once the sensors detect a loss of signal from the valve, the information gets further communicated to the engine control unit. This is why the dashboard light illuminates indicating that you have been driving with bad purge valve.

Mind the check engine light then check your valve (Photo: pinterest.com)

Read more:

2. Rough idling

Is being stuck in a traffic jam with the engine “ON” a common thing to you? If yes, you would know how smoothly or roughly your vehicle handles it. In case, you have been noticing a change that has resulted in rough idling, you need to visit a mechanic. The chances are that the purge valve has been failing and requires your attention. Do not overlook the issue as it could lead to halting of the engine altogether as vacuum leaks are too likely to occur.

3. Tricky ignition

When your car is dealing with a vacuum leak, it is likely that you will find it challenging to start the car. This problem is even more consistent when it is the purge valve that has gone haywire. The vacuum leak would further create a let-in through which air enters the engine and interrupts the combustion process big time. Now, that is not much of a favorable situation! You could also refer to maintenance tips for more problems that could lead to delays in starting your vehicle.

4. Engine performance is not up to the mark

If you are a lover of high speeds, a poor purge valve will ruin the entire fun of driving. The engine performance would get poor, and no matter how hard you try, the power generation would deteriorate. In case you have already started missing your smooth rides, you need to visit a mechanic. You need to take care of such small issues when moving with the desired speeds in your mind.

5. The emission test failures

Do you know that a purge valve prevents toxic hydrocarbons from being ejaculated from the tailpipe? Then, when you have a bad purge valve, there the toxic hydrocarbons would exit the internal system. Such a situation would not be good for your emission control tests. With more toxicity in the air, you would also be reducing your carbon footprint. If it is the purge valve that has been creating the mess, you’d better get it repaired or replaced as need be.

Test your emission to detect bad purge valve (Photo: pinterest.com)

6. Poor fuel efficiency

If the purge valve is stuck open, it can cause excess fuel vapor to be drawn into the engine, which can lead to poor fuel efficiency.

7. Hard starting

A malfunctioning purge valve can cause hard starting or starting issues. This is because excess fuel vapor in the engine can cause flooding, making it difficult to start the engine.

Want to know more about the symptoms of a bad purge valve, let’s watch this video:

Summing Up

A bad purge valve can cause a variety of symptoms that can negatively affect your vehicle’s performance and emissions. Symptoms may include a check engine light, rough idle, poor fuel efficiency, hard starting, and emissions issues. If you suspect that your vehicle’s purge valve is faulty, it’s important to have it diagnosed and repaired by a qualified mechanic to prevent further damage to your vehicle and reduce harmful emissions. Always remember, that the better the health of your car is, the better the driving experience is.

Tsukasa Azuma is an awesome car blogger of Car From Japan. He owns a car repair shop at downtown Osaka, and he put all that experience to good use in his sharing posts. Tsukasa’s blog is one of the best resources for information about keeping your favorite imported car running smoothly. Moreover, because of being passionate to learn about the recent happenings in auto industry, he doesn’t only provide great car maintenance tips, he also always updates latest trends in among car brands and share them in his own interesting viewpoint.

Comments

brian moore12:08 July 03, 2019
Reply

hi, i have a 95 maxima with a p0443, or a bad purge valve solenoid. i have rough idle, stalling after warming up and also difficulty starting. what tests do you perform before assessing that it is stuck open or closed, i do see a bit of white smoke at start up with rough idle. i have 292,000 on her and been going nuts with codes and this problem has been here for awhile, but just recently threw the code, i also have a 0150, which is bank 1 sensor 2 i believe 02 sensor. most likely this is piggy backing off of the evap fault as the 02 was new a few months back. please, what do i do to test to get her running right again? lots of new parts and still rough idle and now this, thanks